![]() 6Pin to 4x Molex 4Pin IDE Port Fan Controller Power Supply Cable For GIGABYTE 80Plus Gold Semi Modular B700H 700W, G750H 750W. So the 3 pin header looks like which is no pattern I'm familiar with. Fan Hub Computer 12V Mini Fan Controller Molex 4Pin SATA 15Pin Power 8Port 4Pin Fan Splitter Hub for PC Desktop RGB CPU Fans Hub. If you have a 4 pin (RGB and 12v header on your motherboard), you could connect the 3 wires (R,G, B) to the header, but power the strip separately using the molex connector (connecting the 12v wire to the molex).Īs for the second picture, I don't know what that adapter is supposed to do.Īs I showed, you have the yellow wire connected to either 5v or 12v in the molex connector (most likely 12v, as red wires are used for 5v tranditionally), and the black wires seem to be connected to middle pins of the molex, GND. So you could take this strip, connect R, G and B together and connect these to one of the middle pins of your molex connector (GND) and the 12v contact to the 12v pin in the molex connector, and you'll get a white strip of leds. So if you connect all three R, G and B to GND(-), red green and blue mix together and you get a WHITE strip.Ī RGB controller adjusts the brightness of each color by turning individual color leds thousands of times a second, mixing various degrees of red, green and blue together. If you connect two or more of the R, G and B contacts to GND(-), then the leds that produce those colors light up and the colors mix up. If you connect 12v contact to 12v and ONLY B contact to GND (-), then there's electricity flowing through the BLUE led and the leds are all blue. hope that puts your mind at ease weston, Aug 21, 2009. Molex ConnectorOperating via Molex power the fans work at 12V with a maximum of 1200 RPM delivering 38 CFM of airflow to keep all your components cool even. A 1600RPM scythe x-flex uses 2.4 watts, so.a single connector can power (at least) 15 of those fans.I think youll be fine. If you connect 12v contact to 12v, and ONLY R contact to GND (-), then there's electricity flowing through the RED led and the RED leds light up. just speculating, but two molex connectors together are enough to power a 6-pin pci express connector, so each can push at least 37.5W. If you look at the RGB strip in your first image, you can see that one contact on the strip it says +12v, R, G, B : ![]() ![]() The molex connector only gives power to the rgb strip, it does not allow you to control the brightness or the particular color of the rgb strip. The Molex connector consists of a plastic housing with multiple pins and sockets that provide a secure and reliable means of transmitting power. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |